AR32.20-P-0200B Remove/Install Front Spring

Removing And Installing Front Spring







NOTE: General information on springs

1 Detach upper shock absorber fixing and raise vehicle

Model 140
CAUTION: The vehicle must be on its wheels for removing the upper shock absorber fixing.

NOTE: Steady piston rod using Alien wrench

CAUTION: Installation: Replace self-locking nut (11a)

2 Insert clamping plates (01b, 01c)
3 Insert clamping device (01a)

DANGER:
- Risk of injury from being trapped or crushed when working on preloaded springs or spring bodies
- Only use approved clamping devices and if appropriate also screen off the danger area. Check special tools for damage and function, (visual inspection) Wear safety gloves.

4 Clamp, unclamp front spring
5 Remove front spring (12) with rubber mount (13) forwards

6 Install in reverse order