AR32.20-P-0300C Remove/Install Torsion Bar on Front Axle

Removing And Installing Torsion Bar On Front Axle







CAUTION: Replace self-locking bolts and nuts

1 Remove bracket (22b)
2 Remove bracket (21b)

NOTE: Installation: Due to the preload of the bracket (21b), first install the hexagon socket bolt (21h)

3 Remove spring leaf swivelling lever (21) and mounting plate (21c)

CAUTION:
- Comply with spring leaf swivelling lever assignment
- The spring leaf swivelling lever (21) differs on the left and right and is mounted differently depending on the model.

4 Remove torsion bar (10)

NOTE: Installation: Align torsion bar (10)

5 Pull rubber mounts (21a, 22a) off torsion bar (10)
6 Install in reverse sequence