Camshaft, Lifters and Push Rods: Service and Repair

Sealing camshaft Oil Bore






Removal, Installation
1 Remove camshafts (77, 78)
2 Use a screwdriver to prise out covers (1)
3 Clean camshafts (77, 78)

NOTE: Mounting holes (adhesion points) for the covers (1) free of oil and grease.

4 Coat circumference of new covers (1) with adhesive compound
5 Use a suitable insertion drift to knock new covers (1)

CAUTION: The cover (1) must not be fitted on at the bore end.

6 Install in the reverse order.