Recalling Actual Values With HHT

The following tests and activations are possible via the Hand-Held Tester.

Preparation For Test
1. Fuses OK,
2. Battery voltage 11 - 14 V.
3. Ignition: ON.
4. Connect the Hand-Held Tester (HHT) to X11/4, according to diagram, see Connection and Use of Test Equipment.

CAUTION!
Model 210
Erasing the Combination Control Module (N10-1) DTC memory, will also erase the DTC memory for the Convenience Feature (CF) and Mirror, steering column adjustment, heated mirrors (MSC).

Model 170
Erasing the Combination Control Module (N10-3) DTC memory, will also erase the DTC memory for the Convenience Feature (CF) and Retractable Hard Top (RHT).

Special Tools: