A. Installation Preparation - All Configurations

1. Read this bulletin in its entirety.

2. Unpack and compare the installation kit(s) contents against the Parts information list on this bulletin.

3. Separate and place the operating guides and client accessories (i.e. chargers, cassette tapes, CDs, etc.) in the glove box or appropriate storage compartment.

4. Remove the trunk mat.

5. Determine the number and sequence of the D2B components to be installed and then locate and configure all fiber optic cables for that configuration.

Note:
Refer to S-SI-82.64/123, D2B Fiber Optic Configuration and Version Coding for proper handling and configuration of D2B fibers.

6. Proceed to:

^ Section B for telephone installation.

^ Section D for CD changer only installation.