Torque Rod: Service and Repair

Remove/install Torque Strut

Model 210 Illustrated:

CAUTION: Installation: Replace self-locking nuts

DANGER:
- Risk of fatal accident from vehicle slipping or toppling off the lift platform
- Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer

5 Thrust arm

CAUTION: The rear axle shaft must be horizontal when tightening the nuts

5h Sleeve in wheel carrier to reduce diameter
- Install sleeve for torque strut in wheel carrier

5g Torque strut cover

NOTE: Note correct installation position

20D Detach, attach bracket
- If present