Rear

Rear






NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.

REMOVAL
- Remove spring link. Service and Repair
- Press rubber mount (6b) out of spring link using remove/installation tool (06a, 06b) No. 129 589 01 43 00, or equivalent





NOTE: To press out jammed rubber mounts (6b) properly, first press the small overlap of the rubber mount as far as the spring link bush using a flat thrust plate (06x)

INSTALLATION





- Press rubber mount (6b) into spring link using removal/installation tool (06a, 06b) until each end of the steel sleeve is the same distance from the spring link bush