Function Test - Section 11

Bulb Test:
- Turn the ignition key to position "2". All malfunction indicator/warning lamps must illuminate.
- Start engine. At > 480 engine RPM, all indicator/warning lamps are to extinguish, indicating that all systems monitored are O.K.
- Independent of engine operation the following lamps go out;
After 4 seconds, the SRS MIL will extinguish.
After 6 seconds, the safety belt warning lamp will extinguish.

CAUTION: Should the malfunction indicator/warning lamps remain illuminated and/or come on while driving, it will be necessary to check the corresponding system using the appropriate ALLDATA section and/or the monitored fluid level as necessary.

Warning Buzzer:
- Exterior illumination and service brake warning
- Ignition key in ignition lock warning
- Safety belt warning for 6 seconds
(the warning tone will cease if safety belt buckle is latched).

Indicator Instruments:
The indicator instruments must reflect the actual operating conditions.