Fan Clutch: Service and Repair

Remove/Install Viscous Fan Clutch

Shown On Engine 112:

1 Fit counterholder (1) on bolts of belt pulley (2), counterhold

NOTE: Belt pulley of coolant pump


2 Unscrew union nut at viscous fan (3)

NOTE:
- Right-hand thread.
- Installation: Use torque wrench with open-end wrench bit.

3 Unbolt fan at viscous clutch

NOTE: Installation: The installation position of the fan is preset through cast-on ribs at fan ring.

4 Install in the reverse order.