Top Up (Differential Operation)

Removal, Installation & Adjustment of Limit Switch, Top Up (Differential Operation)

Removal





Top move to position A with top switch or manual actuation
Plug connector (S84/4x) disconnect
Phillips screw (1) screw out
Limit switch (S84/4) remove together with cable

Installation
Install in opposite order

Special tool





Adjustment
Move top to position B with top switch or manual actuation until screw (3) can be adjusted with special tool (2).
The top should switch over to differential operation (top moves more slowly), when the top frame has passed the highest point (approx. 500mm in front of front locks).
Turn screw (3) to right:
Top switches over to differential operation later
Turn screw (3) to left:
Top switches over to differential operation earlier