Procedures

Preliminary jobs:
Occasional (rear) seats or luggage shelf removed.
[1][2]Procedures
Remove/Install Luggage Shelf
Coupe roof removed (operating instructions)







Rollover bar
Raise.

Edge protector on center columns
Pull off.

Screws (1) on cover (2)
Screw out (left and right sides).

Rubber seal
Pull off of cover (2) (expanding rivet).

Slide (arrow) for cover (3)
Press down.

Coupling
Remove from cover (3).

Cap (4) for screw (5)
Press off.

Screw (5)
Screw out.

Side wall in area of clips (6)
Pull out (clips are installed from rear).

Side wall
Remove toward top.

Installation:
Install side wall from above until clips (7) catch in recesses present in body. Move side wall until clips (6) can be pressed into holes present in body.