GF82.70-P-2002C Start-Up/Accepting Call/Completing Telephone Call (D-Network), Function

GF82.70-P-2002C Start-Up/Accepting Call/Completing Telephone Call (D-Network), Function
- with CODE (274) MB D-network telephone [MODELS 129, 140, 202, 208, 210]
- with CODE (312) D-net portable CTEL [MODELS 129, 140, 170, 202, 210]
- with CODE (313) D-net portable CTEL [MODELS 129, 140, 170, 202, 210]
- with CODE (314) "Standard" D-net telephone (D2B) [MODELS 129, 140, 170, 202, 210]
- with CODE (316) MB D-net telephone (D2B) [MODELS 129, 170, 202, 208, 210, 220]
- with CODE (317) D-net portable CTEL [MODELS 129, 170, 202, 208, 210, 215, 220]
- with CODE (853) MB standard telephone [MODELS 129, 163, 203, 208, 210, 215, 220]
- with CODE (854) MB portable C TEL [MODELS 129, 163, 203, 208, 210, 215, 220]

Function

Initial operation
Before the telephone is used, it is necessary to log into the telephone network (digital network). For this purpose the SIM ( Subscriber Identification Module) card is required.

After inserting the SIM card (already in telephone transmitter/receiver with permanently installed telephone depending on system) and then switching on with the ON/OFF switch on the telephone handset (A34) or on the portable CTEL (A34/6) it is necessary for the user to enter the four to eight-digit PIN code ( Personal Identification Number) when requested.This number prevents unauthorized use of the card and protects against misuse Incorrectly entering the code three times in sequence disables the card, which can be re-enabled with the aid of a personal eight-digit re-enable number (PUK, personal unblocking key or also super PIN). This allows entry of a new PIN number.

If the PUK is entered incorrectly ten times in sequence, the card is rendered unusable and it is necessary to apply to the provider for a new card.

If the number is entered correctly, the telephone logs into the service provider's network. The telephone is then ready for use.

Accepting a call
A call can be accepted by the user in a number of ways:
- picking up telephone handset (A34) (fixed installation), Making a call using telephone handset (A34).
- Pressing the appropriate function button, Telephone handset (A34) (permanently installed) or portable cellular telephone remains in holder, handling call via hands- free system (hands-free system microphone (B25), model 163/168/170/210/215/220 hands-free system loudspeaker (H4/12), model 129/202/208 double-coil loudspeaker for front right radio and telephone hands-free system (H4/14)).
- On vehicles with voice control system (voice control system (CODE 813b): Actuation of VCS switch (S93/2))
- On vehicles with multifunction steering wheel (MFL) and multifunction display (A1p13): Actuation of accept/terminate phone call pushbutton (S111s3).

Placing a call
Just as with receiving a call, a call can be placed by the user in a number of ways:
- by picking up telephone handset (A34) (fixed installation); after entering the desired subscriber's number by pressing the transmit button and waiting until the other party answers.
- the telephone handset (A34) (fixed installation) or portable CTEL (A34/6) is left in the cradle; after entering the desired subscriber's number and then pressing the transmit button, wait until the called subscriber answers
- On vehicles with voice control system (VCS) (code 813b): Actuate VCS switch (S93/2) (voice control system (code 813)) and have number dialed using voice entry
- On vehicles with multifunction steering wheel and multifunction display (A1p13): Actuation of accept/terminate phone call pushbutton (S111s3). During the call the user can, after actuating the corresponding function keys, change between the following types of operation: telephone handset (A34)/ portable cellular telephone (A34/6) or handsfree system (handsfree system microphone (B25), model 163/168/170/210/215/220 handsfree system loudspeaker (H4/12), model 129/202/208 double-coil loudspeaker and right front radio and telephone handsfree system (H4/14)).

When entering the number, it is possible for the user to simplify number entry with the appropriate function buttons by calling up the desired numbers directly from the memory stored for this purpose. In this case, it is possible to call numbers stored either on the SIM card or in the telephone memory.

If the radio is switched on when a call is started, it is muted regardless of whether it is an incoming or outgoing call.

When muted, the word "Phone" appears on the display of the radio/ multifunction display

The information is processed via the vehicle's own bus systems (CAN, D2B or MOST) and discrete lines.In order to transfer information to the bus systems, a so-called interface (adapter) to the bus system in question is required.

More information on the equipment installed is given in the corresponding operating instructions.