Preparation For Test (Seat Adjustment Memory) - Section 22

Preparation For Test (Seat Adjustment Memory)

CAUTION:
- Injury hazard from pinching and crushing, in extreme cases extremities can even he severed when caught in the mechanism.
- Do not allow any body parts to be in the general area of the moving components.

Preparation for Test:
1. Review component Locations, Electrical Seat Adjustment (ESA) Electrical Seat Adjustment (ESA) Connection of Components - Section 21 Version Coding: ESA With Memory - Section 31
2. Battery voltage 11 - 14 V,
2. Check fuses - OK,
3. Prior to each connection or disconnection of connectors at the combination control module (N10-1), the battery ground cable must he disconnected (otherwise fault codes will he erroneously stored in DTC memory),
4. Ignition ON, or applicable door opened.
5. Voltage supply for control modules and CAN data wiring OK refer to Information Bus, System Diagnosis. Testing and Inspection
6. Version coding Correct Version Coding: ESA With Memory - Section 31

Special Tools

Special Tools:

Test equipment; See Standard Service Equipment Program
Description Brand, model, etc.
Digital Multimeter 1) Fluke models 23, 77 III,83, 85, 87