Traction Systems and SPS (DTC Memory [12])
Traction Systems (ABS, ASR, ETS) and Speed-Sensitive Power Steering (SPS)
Diagnostic Trouble Code (DTC) Memory [12]
Model 129, 140, 202 as of 09/95, (ABS, ASR, ETS, SPS)
Model 170, Model 208
Model 210 with engine 112, (except 4MATIC) 113, 119
Model 210 with engine 104, 606 as of 06/96
Model 210.08, 210.28
(above models without ESP)
Preparation for DTC Readout
Note: DTC readout is no longer possible using the impulse counter scan tool.
1. Connect Hand-Held Tester (HHT) to data link connector (X11/4) according to connection diagram (see section 0).
Note: Test cables are not to be hooked up to the HHT while performing function tests.
Read out DTC memory from ABS, ASR OR ETS control modules before starting repair procedures. DTC memory must also be read out from ME-SFI and EA control modules on vehicles with ASR.
2. Ignition: ON
3. Read out DTC memory for control modules
Special Tools:
