Remove/Install Fuse Box In Trunk

Removing And Installing Fuse Box In Trunk

Illustrated On Model 202:

1 Disconnect ground cable at the battery
2 Unclip cover on fuse box (4)
3 Unscrew nuts on left support base for fuse box (F4)
4 Unclip fuse box from sheet metal channel on floor of trunk and remove right support base from guide
5 Remove fuse blocks (A, B and C)
6 Disconnect leads on fuse boxes or fuse blocks Connect leads to fuse boxes or fuse blocks.

CAUTION: Disconnect leads only when replacing entire fuse and relay box. Tie disconnected leads from individual fuse blocks together and mark to prevent mix-ups.

See "Special Tools" given below.

Connect leads from fuse boxes or fuse blocks.

7 Reinstall in opposite order


Special Tools

Removal Tool, P/N # 202 589 03 33 00: