General Torque Specifications

717.4 Torque Specifications

Tightening Torques (N.m)

Housing
Nut for attaching locking lever for reverse gear 20 N.m
Bolt for attaching reverse idler shaft 20 N.m
Oil drain plug 60 N.m
Oil filler plug 60 N.m
Bolt for attaching bracket to intermediate plate 30 N.m
Nut for attaching reverse gear lever to intermediate plate 20 N.m
Ball head bolt for clutch release lever to transmission 35 N.m
Breather to transmission housing 40 N.m

Gear Assembly, Shafts
Collard nut, locking lever for reverse gear and leaf spring 20 N.m
Bolt, locking cage 8 N.m
Bolt, shift lever
Bolt quality class 8.8 25 N.m
Bolt quality class 10.9 30 N.m
Bolt, bearing shafts 8 N.m
Preload, pressure for input shaft 25 N.m
Preload, pressure for countershaft 10 N.m
Hexagon head bolts, locking cage 8 N.m
Twelve-sided nut 160 N.m
Allen screws, gear selector lever 30 N.m
Hexagon head bolts, bearing shafts 8 N.m
Hexagon head bolts, rear transmission cover
Bolt quality class 8.8 20 N.m
Bolt quality class 10.9 28 N.m
Hexagon head bolts, front transmission cover
With press-fitted bearing tube 20 N.m
With bearing tube bolted on 28 N.m
Allen screws, retaining ring to intermediate plate 30 N.m
Collared nut, locking lever 20 N.m

Bolt, Transmission To Engine
M10X40, Bright galvanized 55 N.m
M10X40, Dacromet-coated 40 N.m
M10X90, Bright galvanized 45 N.m
M10X90, Dacromet-coated 40 N.m
Nut, joint flange/internally-geared wheel 160 N.m