| Engine 111.920/921/940/941/942/943/944/945/946/947 | Engine 111/960/961/970/973/974/975/977 |
| Distance from middle of conrod bearing bore up to conrod bush bire | 154 mm | 149 mm |
| Width of conrod at conrod bearing bore and at conrod bush bore | 21.95-22.00 mm | 21.95-22.00 mm |
| Conrod bearing shell basic bore | 51.60-5162 mm | 51.60-5162 mm |
| Permissible out of roundness and conicity of basic bore | 0.02 mm | 0.02 mm |
| Permissible twist ofconrod bearing bore to conrodbush boreover length of 100 mm | 0.1 mm | 0.1 mm |
| Permissible variance of axial parallelism of conrod bearing bore to conrod bush bore over length oh 100 mm | 0.05 mm | 0.05 mm |
| Permissible difference in weigtht of complete conrod of an engine | 4 g | 4 g |
| Conrod bush inner diameter | 22.007-22.013 mm | 22.007-22.013 mm |
| Conrod bush basic bore | 24.50-24.52 mm | 24.52-24.50 mm |
| Piston pin play in conrod bush | 0.007-0.018 mm | 0.007-0.018 mm |
| Peak to valley height of conrod bush on inside | 5 mm | 5 mm |
| conrod bearing play at crankshaft | 0.03-0.05 mm | 0.03-0.05 mm |