Ignition Coils, Design

Ignition Coils, Design

ENGINE 104
ENGINE 166
ENGINES 111.921 /942 as of 1.9.98,
111.943,
111.944 as of 1.8.96,
111.946 as of 1.6.98,
111.947 /973,
111.975 as of 1.8.96
ENGINE 111.945
in MODELS 208.335 /435 as of 1.6.98,
202.020 /080 as of 1.9.98
ENGINE 111.974
with CODE (494a) USA version
with CODE (807) Model year 1997
with CODE (808) Model year 1998




Engine 104, 111
T1 Twin spark ignition coil
4a Secondary output
4b Secondary output
W Guide sleeve




Engine 166
T2 Ignition coil module

Engines 104, 111
The twin spark ignition coils (T1/1, T1/2, T1/3) are mounted directly onto a spark plug together with a spark plug connector via the secondary output (4a). The secondary output (4b) leads via an ignition cable to the other cylinder. The guide sleeve (W) is at the same time the ground connection for the ignition coil. The voltage is supplied fuse-protected by the ignition/starter switch

Engine 166
Two twin spark ignition coils are used, which are combined in a housing, the ignition coil module (T2)