A. Installation Preparation - All Configurations

A. Installation preparation - all configurations

1. Read this bulletin in its entirety.

2. Unpack and compare the installation kit(s) contents against the Parts Information list on page 9 of this bulletin.

3. Place the operating guides and client accessories (i.e. chargers, cassette tapes, CDs, etc.) in the glove box or appropriate storage compartment.

4. Remove the trunk mat.

5. Remove the left and right trunk-liner panels if installing the telephone; otherwise skip to step 6.

6. Determine the number and sequence of the D2B components to be installed, then locate and configure all fiber optic cables.

Note: Refer to S-SI-82.64/123, D28 Fiber Optic Configuration and Version Coding for proper handling and configuration of D2B fibers.

7. Proceed to:

- Section B for telephone installation.

- Section G for CD changer only installation.