Hand-Held Tester (HHT) Version Coding and Programming

All new spare parts combination control modules (N10-3) which are installed and connected to the vehicle electrical system must be programmed with the following data, using the Hand-Held-Tester.

Version coding
- (USA)/ECE
- (CH)

Coding accessories
- ATA
- Rain sensor

Important: The combination control module (N10-3) can be reprogrammed as many times as necessary.

CAUTION: Erasing the Combination Control Module (N10-3) DTC memory, will also erase the DTC memory for the Retractable Hardtop.