Ignition Shut Down Relay (For Antitheft): Service and Repair

STARTER LOCK OUT RELAY R&R





- Turn ignition switch off.
- Remove radio.
- Remove Climate Control/Heater Control Panel.
- Screw (1) in center of oddments tray unscrew.
- Bend oddments tray inwards at upper corners (arrows), press forward and remove at corners.

CAUTION: Do not use tools with sharp edges to remove the oddments tray to prevent damaging the wood cover (6). If necessary the oddments tray can be lifted with a small installation hook at the center screw hole (arrow).

- Unscrew screws (2 and 3) below oddments tray.
- Press cover (6) to left out of catch at rear and lift at right.
- Press cover (6) to right out of catch at rear and lift at left.
- Lift cover (6) at rear and pull downward out of upper catches.
- Pull off plug connections on switches.
- Remove cover (6).
- Remove starter lock out relay
- Reinstall in opposite order.
- Perform general function test.