AH01.45-P-0001-01D Notes on Application of Sealant Oil Pan

AH01.45-P-0001-01D Notes on application of sealant oil pan

Component Identification:

Application of sealant to top part of oil pan
The line drawn F marks the application of sealant.

Clean sealing surfaces, apply sealant only to the specified surfaces with a bead of 2.0 mm ± 0.5 mm.

The sealant must be applied within 10 minutes!

The silicone bead must not be spread. Only the approved silicone sealant may be used.

Component Identification:

Application of sealant to bottom part of oil pan
The line drawn F marks the application of sealant.

Clean sealing surfaces, apply sealant only to the specified surfaces with a bead of 2.0 mm ± 0.5 mm.

The sealant must be applied within 10 minutes!

The silicone bead must not be spread. Only the approved silicone sealant may be used.