Top In Top Compartment

Removal, Installation & Adjustment of Limit Switch, Top In Top Compartment

Removal





Top move to position A with top switch or manual actuation.
Plug connector (S84/3x) unclip and disconnect
Nuts (1) screw out
Limit switch (S84/3) remove together with cable

Installation
Install in opposite order

Adjustment
Limit switch (S84/3) should actuate when the upper part (seal) of the top is level with the trunk lid in the retracted state.
Turn screw (2) to right: Limit switch (S84/3) switches later
Turn screw (2) to left: Limit switch (S84/3) switches earlier