Rear Pocket Actuator

Preliminary operation:
Checking interior central locking for leaks. Testing and Inspection

NOTE: Rear door pocket element eliminated as of 09/95





Door panelling
Remove. Removal and Replacement

Door pocket (f)
Unscrew (12 screws).

Pneumatic line (6)
Lever off with open-end wrench (width between flats 7).

Spring clip (20)
Pull off.

Connector piece (26)
Clip out at the reversing lever (7).

Element (11 or 13)
Take out.

Pneumatic function of the element
Check. Testing and Inspection

In order to renew the link element (26)
Rebuild or renew.

Element
Install in the reverse sequence.