Power Distribution Relay: Service and Repair

Quiescent current retention unit
disconnect, connect.

Ground cable on battery
disconnect, connect.

Fuse box cover (1)
remove, install.

Connector
remove from mount, install.

Connector mount
remove, install.

Screws (3)
unscrew, screw in.

Relay box cover (4)
remove, install.

Combination relay (N10, N10/2)
remove, install.

NOTE: The combination relay (N10, N10/2) is arrested with four catch lugs.

Electrical connections (arrows)
disconnect, connect.


Commercially available tester
Quiescent current retention unit e.g. Hans Zeheter CMP 12.2