Camshaft Gear/Sprocket: Specifications

Tightening Specifications for Intake Cam Timing Adjuster/Sprocket:
Armature To Control Piston
1st version * (bolt + washer) 7 Nm
2nd version (collar bolt) 5 Nm + 90°
Nut 20 x 1.5 65 Nm
Bolt Of Guide Sprocket 35 Nm
Bolt of Solenoid to front cover 10 Nm

* When performing repairs, replace 1st version with second version.

NOTE: Guide Sprocket Bolt Is Lefthand Thread.