Remove/Install Panelling On Inner Trunk Lid

Trunk lid
open and remove warning triangle.

Side clips (figure 1, arrows)
remove (2 pieces).

Bracket (1)
remove by pulling out dowels and unclipping bracket (1).

Panelling (2)
unclip (18 clips) and remove (figure 2).

Panelling (2) on trunk lid
clip on and put into closing eye frame (3) (figure 1, arrows).

Bracket (1)
reinstall.

Side clips (figure 1, arrows)
reinstall.

Warning triangle
reinstall.

Trunk lid
close.