Remove/Install Panelling In Trunk

Cover (1)
remove.

Bulb holder for left taillamp
open.

Panelling (2)
remove, by removing three plug-in clips (arrows) and pull out panelling (2) starting at the top.

Stowage compartment (4)
remove.

Spare wheel cover
open and remove plug-in clip in the front of the spare wheel recess (arrow).

Bulb holder for right taillamp
open.

Panelling (3)
remove, by removing the remaining plug-in clips (2 pieces, arrows) and pull out panelling starting at the top.

Panelling (5)
remove (panelling on rear center panel removed), and remove plug-in clip (5 pieces). Remove/Install Panelling On Rear Center Panel

Panelling (6)
remove (10 plug-in clips) and remove panelling (6).

Reinstall
in opposite order.