Demagnetizing Following Welding Work

Pushbutton on demagnetization coil
press and demagnetize area welded.

NOTE: Do not switch off coil during demagnetization procedure.

NOTE: Circle around welded point with coil 10 to 20 times and then continue moving coil in circular motion while increasing distance to approx. 1 m before switching off coil.

Pushbutton on demagnetization coil
press and demagnetize vehicle roof on left and right.

NOTE: Do not switch off coil during demagnetization procedure.

NOTE: Circle around vehicle roof on left and right with coil 10 to 20 times and then continue moving coil in circular motion while increasing distance to vehicle roof before switching off coil.

Electronic compass
calibrate.

Commercially available tools and test Instruments, MB test Instruments
Designation e.g. company, order No.
Demagnetization coil BERNSTEIN-Werkzeugfabrik
Steinrucke GmbH
Industriehof Trechnase 1
D 4289 Remscheid