AR41.10-P-0070-01A Remove/Install Boot on Propeller Shaft of Front Axle Gear

AR41.10-P-0070-01A Remove/install boot on propeller shaft of front axle gear
Long-life grease (NLGI grade 2)

Remove

Component Identification:

1 Detach universal joint (72) from propeller shaft (70).
2 Remove rubber sleeve (71).

Install
3 Coat splined profile with Molykote grease (long-life grease).
4 Push rubber sleeve (71) onto propeller shaft (70) with universal joint (72).

Pay attention to markings (arrows) for installation position.

5 Check rubber sleeve (71) is correctly seated.