In Front Bumper

Removing And Installing Parktronic System (PTS) Sensors In Front Bumper

Model 208:

Model 210:

1 Remove front bumper
2 Disconnect connector for Parktronic System (PTS) in left front bumper (X26/27)
3 Unclip damping elements (4)
4 Unclip Parktronic System sensor (1) from bracket

See "Special Tools" given below.

5 Disconnect connector (3) from sensor (1)
6 Remove seal (2) from sensor (1)
7 Install in the reverse order

Special Tools

In Front Bumper

Model 208:

Model 210:

Releasing Tool, P/N # 140 589 06 31 00: