Injection Timing: Testing and Inspection

Testing start of delivery with digital tester (RIV method)






Connection diagram of digital tester with adapter (without adapter see Adjusting Start of Delivery W/Digital Tester (RIV Method) After Testing) Adjustments

Unscrew plug at governor housing (10/6)
Tightening torque 30-35 Nm.

Unscrew RI sensor (017).
Connect Digital tester (001) and pulse generator (021).
Start Engine.
Read off RI value on digital tester at idle speed.
RI specification: 14° ±0.5° ATDC
Adjust start of delivery, it necessary see Adjusting Start of Delivery W/Digital Tester (RIV Method) After Testing) Adjustments

Perform leak test with engine running
Check engine oil level, adjust to correct level if necessary.

Special tools






Commercially available tools