A/C Pressure Switch S32

Removal, Installation
Air conditioning system
drain (recycle).

Two plugs on pressure switch (S32)
disconnect.

Pressure switch (S32)
screw off.

Connection on fluid reservoir
plug.

Install
in opposite order. Moisten 0-ring with refrigerant oil and tighten to 10 ± 2 Nm.

Air conditioning system
evacuate, charge and check for proper function and leakage; allow engine to run at idle only for first 4 minutes.

Data
Pressure switch (S32) for Switch-off pressure: 15 ± 0.5 bar
fluid reservoir for auxiliary Switch-on pressure: 20 ± 0.5 bar
fan speed 2