Replacement of Seat Belt Extender Microswitch

Preliminary work: Complete seat belt extender removed.





A10 or A11 Left or right seat belt extender
A10s1 or A11s1 Extender arm retracted switch
A10s2 or A11s2 Extender arm extended Switch
A10s3 or A11s3 Force limit switch

Plug connection (1) to control
unit (N42) disconnect.

Cable strap (2) open.

Flat plug connectors on motor disconnect.

Screws (arrows) for microswitch screw out.

NOTE: Secure mounting screws for microswitch with securing paint.

Plug connection (1) on mount hook

Installation is reverse of removal.