Remove/Install Ram Manifold

Intake manifold with mount for intake noise muffler






Prerequisite: resonance intake manifold removed. Remove/Install Resonance Intake Manifold

1 Remove control cable from bracket of throttle control lever (32/3).
2 Take off ram manifold.
a. Models with oil-to-water heat exchanger: unscrew bolt at the resonance intake manifold from the pipe fixture with spacer sleeve.
b. Models with oil cooler: unscrew bolt from the oil pipe fixture.

NOTE: Replace ram manifold, if necessary. To do this, remove all the parts attached to the ram manifold and fit onto new ram manifold. Replace gaskets.

3 Install in reverse sequence.

NOTE: When installing, ensure that no vacuum pipes or electrical wiring is trapped.