Models 124, 126, 129 and 201 W/ Engines 103/104
MODELS 124,126, 129 AND 201 WITH ENGINES 103/1041. Remove fan shroud and fan with viscous clutch (SMS, Repair Instructions, Job no. 20-3120).
2. Loosen coolant pump pulley and fan pulley, and remove after performing step 3.
3. Remove poly-V-belt (SMS, Repair Instructions, Job no. 13-3420).
4. Remove belt tensioner shock absorber.
5. Remove vibration damper and pulley (SMS, Repair Instructions, Job no. 03-3420).
6. Apply sealant/locker to fitting (arrow, Figure 7) and tap it into the lower vent bore of the coolant pump with a suitable mandrel.
7. Push drainage pipe over the fitting and route between crankcase and power steering pump bracket (Figure 8).
B. Proceed with reassembly in reverse order of removal.
Parts Information
Part Name Part Number
Drainage pipe kit 103 200 20 52
Sealant/locker (e,g Loctite(R) 242/Wurth(R) 242) Local purchase
In Case of Warranty
Operation: Coolant pump drainage pipe, retrofit (02-2028)
Coolant pump drainage pipe. install (02-2029)
(when replacing coolant pump)