Shift Points In Selector Lever Position "D"

Shift Points In Selector Lever Position "D"

Note:

All vehicle speeds indicated are approximate. They apply to the respective standard rear axle ratio and tyres. Variations from the figures stated are caused by scatter at the transmission end as well as in the speedometer reading.

Vehicles with programme selector: switch setting.
E = economy
S = standard


Instruction regarding shift points In selector lever position "2" and "3"

The 1 - 2 upshift in selector lever setting "2" on vehicles with gasoline or diesel engines is performed only at maximum engine speed and with the accelerator pedal at full throttle stop. Shift paints in selector lever position "2" and 3" are no longer stated for reasons of simplification.

Model 123/124 Shift Points Up To 08/89:

Model 124/126/201 Shift Points Up To 08/89:

Model 201 Shift Points Up To 08/89:

Model 124/201 Shift Points Effective 09/89:

Model 124/201 Shift Points Effective 09/89:

Shift Points (Natural Version):

Shift Points (Natural Version):