AR67.20-P-3550-01GZ Cut Out Window With Cutting Blade

AR67.20-P-3550-01GZ Cut Out Window With Cutting Blade

DANGER: Risk of injury caused by slipping when clamping blade in the multicutter and by glass splinters when cutting out bonded windows

Always interrupt air supply when inserting or removing blade. Wear protective gloves and safety glasses.

Workshop Equipment:

1. Secure rear-end door window against falling down using fabric tape in area A.







2. Clamp straight blade into multicutter.
3. Moisten whetstone and sharpen both sides of blade with machine switched on.
4. Cut out rear window from inside in areas B to E. Guide blade as close as possible to vehicle body.
5. Remove rear-end door window using cup suction tool.
If a complete BTB cutting tool kit is available, only blades WK4ZVS and WK24RS are required in addition.