AR67.20-P-1000-07GZ Prepare Rear Window For Installation

AR67.20-P-1000-07GZ Prepare Rear Window For Installation

Repair Materials:

1. Check rear-end door window (1) for damage.
2. Clean rear-end door window.
3. Apply glass activator to gluing areas of rear-end door window with part of the paper towel and wipe with remaining paper towel.
Apply glass activator only to black gluing areas. If glass activator gets onto transparent areas wipe off immediately. Allow glass activator to dry completely. When recycling rear-end door window apply glass activator only where glue residues are no longer present.

4. Apply glass primer to gluing surface of rear-end door window with application rod.
When recycling removed rear-end door window apply glass primer only where glue residues are no longer present. Then allow glass primer to air-dry completely (min. 5 min.)