Body - Outside Door Handle Doesn't Return To End Position

OUTSIDE DOOR HANDEL DOES NOT RETURN TO END POSITION

Themen-Nummer LI72.00-P-053016

Version 1

Konstruktionsgruppe 72.00 General

Stand 01-18-2012

Gultigkeit W166

Anderungsrund

Beanstandung:
The outside door handles on the front and/or rear doors no longer return automatically to the end position after actuation

Ursache:
Incorrectly installed shim between outside door handle and door shell cutout.

Abhilfe:

1. Remove door handle.





2. Loosen bolt of bearing bracket see item 1 Figure 1.

3. Push bearing bracket towards the rear of the vehicle as far as the stop and retighten bolt.





3. Check position of shim in door and correct if necessary see Figure 1 and Figure 2.

4. Install door handle

5. Perform function test.





Symptome





WIS-Referenzen