AN54.65-P-0030-03GQ Retrofit the Backup Camera Wiring Harness

AN54.65-P-0030-03GQ Retrofit the Backup Camera Wiring Harness
Model 166.0
- with code (512) COMAND APS incl. DVD changer
- with code (527) COMAND APS (with navigation)
- with code (528) COMAND incl. DVD changer





1 Fit electrical connection 2 for reversing camera (B84/3x2) from reversing camera wiring harness (1) into reversing camera (B84/3).
2 Route reversing camera wiring harness (1) along the rear-end door wiring harness to the rubber grommet on the right (2) of the rear-end door.
3 Remove rubber grommet at right (2) and route reversing camera wiring harness (1) through the rubber grommet at right (2).
4 Fasten reversing camera wiring harness (1) to rear-end door wiring harness using cable ties.
5 Route reversing camera wiring harness (1) along vehicle wiring harness to the transmission tunnel.
6 Route reversing camera wiring harness (1) under the air duct (3) to the radio opening.
The electrical connection for the video signal is connected when the radio is installed.