AR41.10-D-0101-03I Press on Propeller Shaft Center Support Bearing

AR41.10-D-0101-03I Press on Propeller Shaft Center Support Bearing
- Propeller shaft center support bearing (without protective caps) on sliding piece with 2- and 3-piece propeller shaft





906 589 01 15 00
Drift





1 Drive the protective cap (7) onto the bearing seat up to the end stop of the drift





2 Drive the propeller shaft center support bearing (6) onto the bearing seat up to the end stop of the drift.





3 Drive protective cap (5) up to the end stop on the bearing seat using drift.

Do not drive on the bearing connection (5, 6, 7) further than the drift permits as the installed dimension is established by the drift.