Power Take-Off Solenoid: Service and Repair

AR26.45-D-0020-02B Remove/Install Shift Cylinder.
- TRANSMISSION 711.651
- with CODE (N05) Power take-off countershaft (2c) without flange
- TRANSMISSION 711.651
- with CODE (N07) Power take-off countershaft (2b) with flange









Shown on transmission 711.680

1 Remove the shift cylinder (3),.

Installation: Note different shank lengths of the screws (4), mark installation locations if necessary.

2 Remove gasket (2) and washer (1).

Install: Replace gasket (2).

3 If the shift cylinder (3) is replaced: Remove power take-off switch (S161).
4 Install in the reverse order.