AR54.21-D-2001-02C Carry Out Expert Coding

AR54.21-D-2001-02C Carry Out Expert Coding
- with CODE (ED5) Parameterizable module (PSM) Variable Arbeitsdrehzahlregelung


Function: Several fixed working speeds should be specified and the working speed can be freely adjusted via two buttons.

Via a switch, which at input 01 (plug 2, pin 4) is connected to the parameterizable special module (PSM), the variable working speed control (ADR) should be able to be activated or deactivated.

The variable working speed control (ADR) should be able to be increased via a button which at input 02 (plug 2, pin 6) is connected to the PSM [parameterizable special module] and should be able to be lowered via a second button at input 03 (plug 2, pin 7).

Preconditions:
- Module limitations active (parameters)
- Terminal 15 active
- ADR inactive

1 Select menu "Expert coding"
2 Select menu item "Special functions"
3 Select menu item "Rpm control"
4 Select menu item "Working speed control"
5 Select menu item "Signal settings"
6 Set parameter "Request 'working speed control' from discrete input" to signal-ID "1013"
7 Conclude coding by pressing the F3 button
8 Select menu item "property parameterizing"
9 Set parameter "working speed control" to "ACTIVATED"
10 Conclude coding by pressing the F3 button
11 Select menu item "Special functions"
12 Select menu item "Rpm control"
13 Select menu item "Rpm change"
14 Select menu item "Signal setting"
15 Set parameter "Request rpm increase" to signal ID "1014"
16 Set parameter "Request rpm reduction" to signal-ID "1015"
17 Conclude coding by pressing the F3 button