GF54.30-D-2012HL Display Monitoring/Warning Messages Via Multifunction Display, Function

GF54.30-D-2012HL Display Monitoring/Warning Messages Via Multifunction Display, Function

- except CODE (JK3) High-end instrument cluster with speedometer in km

Starting in the main screen (time, outside temperature, speed, gear indicator, main odometer and trip odometer), the following menus can be displayed on the display (A1p1) of the instrument cluster (A1):
- Oil level with engine switched off and "circuit 15 ON"
- Stationary heater (if installed)
- Kilometer reading or mileage
- Dynamometer test
- Workshop services (software, hardware, Mercedes-Benz number, engine number, etc.)

The respective control and warning messages are only displayed if the associated system is installed in the vehicle.

The following displays or warnings may be shown:
- Instrument cluster is not configured
- Vehicle is processing
- Roller dynamometer
- Fault at engine start
- Oil warning (low oil level)
- Oil warning (high oil level)
- Replace transmitter key

Diagnosis is performed using STAR DIAGNOSIS.