AH83.70-N-0001-05A Notes on Retrofitting Stationary Heaters With Fuel Combustion

AH83.70-N-0001-05A Notes On Retrofitting Stationary Heaters With Fuel Combustion
- with stationary heater with fuel combustion

Observe approval regulations for retrofitting stationary heaters.

Retrofitting a stationary heater or converting a standard heater booster into a stationary heater is subject to approval in the Federal Republic of Germany. In other countries observe applicable regulations.

Observe the installation instructions/operating instructions from the manufacturer included with the parts kit for installation and operation. Position sticker "Shut off heater before fueling" at a point where it is easily visible, e.g. on the B-pillar on the driver's side or in the area of the fuel filler fitting.

A stationary heater or converted heater booster must be approved by an authorized testing facility in the Federal Republic of Germany or customer should be advised that approval is required when given the manufacturer's documentation.

Fill out guarantee card and submit to customer together with manufacturer's documents.