Campaign - Install Vehicle Emission Control Information Label

FILE: SERVICE:
GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER

Campaign No. 2011040002, May 2011

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT:
Model 906, Model Year 2011
Install Vehicle Emission Control Information (VECI) Label

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz and Freightliner Sprinter vehicles, has determined that the Vehicle Emission Control Information (VECI) Label may not have been installed in the subject vehicles. Dealers will install the VECI Label at the next workshop visit.

Prior to performing this Service Campaign:

^ Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.

^ Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

Approximately 59 vehicles are affected.






Procedure

1. Open hood.

2. Clean contact surface to prior to installing label.

3. Affix VECI label (arrow, Figure 1) to radiator support cross-member.





Primary Parts Information





Warranty Information