GF54.21-D-0002-04H Parameterizable Special Module (PSM) Control Unit Connector Assignment

GF54.21-D-0002-04H Parameterizable Special Module (PSM) Control Unit Connector Assignment
- with CODE (ED5) Parameterizable special module (PSM) Allgemein






1 Connector 1
2 Connector 2
N26/15 PSM control unit

No outputs on the PSM control unit should be active when connectors 1 and 2 are disconnected from the PSM control unit. First disconnect connector 1 (connector with circuit 30 supplies) and then connector 2.

For reasons of contact reliability, only MCP 2.8 contacts (silver, unsealed) from Tyco should be used where necessary.