SM14.40-D-0002-12S Remove/Install SCR Frame Module Cable Set

SM14.40-D-0002-12S Remove/Install SCR Frame Module Cable Set





1 Route cable set (1) along cable set (4) to driver seat cushion and fasten in place.





2 Detach connector of cable set (4) from body.
3 Detach connector from cable set (4).
4 Plug terminal connector (5) onto cable set (4) and insulate.





5 Fasten connector (2) onto body.





6 Remove fourteen lines from connector for AdBlue control unit (6) of cable set (4) in line with following overview, and replace the lines (3) of the new cable set (1).

Cable Chamber

YEWH 2
YEBK 4
YEBU 6
GYBK 10
GYBU 11
GYGN 12
GNBK 26
GYWH 56
GNBU 60
BKPK 67
GNBN 81
GYBN 90
GNYE 93
WHGY 94

8 Connect ground lines (7) to ground point (W71/2) in driver-seat box.





9 Detach removed cable set (4) lines.
10 Plug terminal connector (5) onto cable set (4) and insulate.