GF72.29-D-2007H Manual Power Window Raising, Function

GF72.29-D-2007H Manual Power Window Raising, Function


Function requirements:
- No overvoltage or undervoltage
- Circuit 15 ON or circuit 15R ON

Interruption of "Manual raising" function:
- Function requirements are not satisfied
- Blockage detection
- Actuation of excess force limiter (with normalized windows)

Driver-side control point

The front windows can be closed manually via the driver door control panel (S47) by actuating the left front power window button (S47s1) or right front power window button (S47s2) to the catch point via the driver door control panel.

The corresponding signal is read in by the driver door control unit (N69/1) which directly actuates the driver door power window motor (M10/1)The closing request for the front passenger door power window motor (M10/2) is realized by the SAM control unit (N10) which then accomplishes the actuation.

Close electric vent window (with code (W32) Rear power vent windows in passenger compartment)

The closing requests for the left vent window motor (M21/8) and right vent window motor (M21/9) are transmitted by the left vent window pushbutton (S47s3) and right vent window pushbutton (S47s4).

Front passenger control point

The window in the front passenger side can only be closed via the front passenger power window switch (S21/2)The closing request is read in by the SAM control unit, which directly actuates the front passenger door power window motor.